HW-ACFS closed type stainless steel corona processing station single sided with cylinder and ozone emissions

1. Side mounting (see frontal mounting at HW-AFS)

2. The cover material could be stainless steel or aluminum.

3. The long effective treatment width reaches 4000MM.

4. The speed is usually 200mts/min.

5. Adopting import silicon tube as a medium, which is puncture-resistant with more than 10000 hours usage time.

Engineers were testing machines for the last time before the shipments

Production line 1

Package sent abroad for the reference

Package parameters for standard machines

Scope of application

The blown film, printing, composite, coating, laminating, extruding, oil spraying, and other particular industries.
Applicable materials: all kinds of plastic film (such as PP, PE, PETP, OPP, PS, PA, etc.), aluminum foil, aluminum plating film, paper, and fiber materials

Configuration

1. organic glass, iron, stainless steel, aluminum
2. aluminum, or ceramic discharge electrode
3. cylinder for easy open and close
4. outage protection
5. ozone extraction holes

6. matched duck fans for cooling

       Please contact us for more machine technical details and proposal.

Tips: corona treatment on extruding

Another most important application of corona treatment is extrusion coating and laminating. Base materials such as paper, cardboard, aluminum, and plastic are used here in various forms. These are laminated together using a plastic melt or are coated with plastic melt. All materials of the laminate must be corona treated in-line before coating or laminating to achieve an acceptable degree of laminating strength. In this case, the corona treater is installed as close as possible to the laminator respectively before the anchor coating unit. Depending on the material and demand for bond strength, in many cases, the LDPE coating can be carried out without anchor coating by use of the corona treatment with considerably lower costs.