>= 1 Set(s)
US $3,500.00 ~ 5,000.00
General Introduction
The purpose of surface treatment of polymer-based materials is to increase surface wettability through electrical discharge. The low surface energy of polymer-based substrates often leads to poor adhesion of inks, glues, and coatings. To obtain optimum adhesion, it is necessary to increase the surface energy of the substrate to just above that of the material to be applied. Corona treatment results in improved surface adhesion properties. The surface of treated material increases the adhesion through the discharge area by the conveyor.
Main features
Sheet corona treater, as a whole system, is easy to install.
HW-PCP is available as a single or double-sided surface treatment system.
It can be installed as a stand-alone unit or with a conveyor system for integration into existing production lines.
The speed and corona frequency can be changed by the button of the control panel to satisfy the different requirements.
Treatment of sheets and flakes for this application may vary from 50 mm to 2000 mm, which gives the customer treatment flexibility for small and large plates.
Technical Specification
Item | HW-PCP |
Treatment Size | 50-2000mm |
Mains supply | 380V, AC±5 %, |
Mains frequency | 50KHz±5 % |
Speed | 30-60 m/min |
Output frequency | 30 kHz |
App. output power | 0-10KW |
Corona output | a. Constant at the same speed b. No influence of supply voltage |
Thickness | 0.2-0.5MM |
Dynes level | 38-56Dynes/cm |
Ready to ship
Package
Please contact us for more machine technical details and proposal.