العربية
français, langue française
हिन्दी, हिंदी
Bahasa Indonesia
فارسی
Português
русский
Español
Afrikaans
JL-50 series contrast sensor intelligent color mark photoelectric sensor PNP NPN output similar to Italy DATALOGIC TL50
>= 1 Piece(s)
US $90.00 ~ 110.00
Top Selling
- OVERVIEW
- SPECIFICATIONS
- OTHER
Brief Introduction
JL-50 series intelligent color mark photoelectric sensor has a built-in PIC chip, which can intelligently identify the background color and color mark by loading the programming program, and automatically select the appropriate light source according to the color difference to adapt to different background colors and color marks. And it has high precision and fast response speed. Compared with the traditional Z3N and Z3S series color mark sensors, it can automatically select the light source when the color mark and the background color are replaced, and it is very convenient to use and adjust.
Main Characteristics of JL-50 Series
Intelligent selection of background color code (automatic selection of red, green, and blue light): the sensor can automatically select the appropriate light source color to work according to the color difference between the color code and the background color, with high detection and high sensitivity
15K switching frequency, intelligent setting button: 33μs response time, high precision, high repeat reading
Aviation socket: 4-core aviation socket, convenient and fast connection
Key Technical Parameters of JL-50 Series
| Power supply | DC10-24V |
|---|---|
| Ripple | 2Vpp max |
| Output | 1 NPN output 1 PNP output |
| Output current | 100mA max |
| Output saturation voltage | ≤2V |
| Response time | 33μs |
| Switching frequency | 15kHz |
| Indicators | 0.1~1ms |
| Output mode | OUT LED (yellow)/READY LED (green) |
| DARK/LIGHT selection | Automatic |
| Temperature | operating:-10~5℃ storage:-20~70 ℃ |
| Operating distance | 9mm+/-1mm |
| Emission type | RED(630nm)/GREEN(520nm)/BLUE(465nm)
with automatic selection |
| Housing material | ABS |
| Lens material | PMMA |
| Mechanical protection | IP67 |
| Connection | M12 4 core protection shielding cable |
| Weight | 90g |
Wiring Method
Shell Size
Installation
The sensor can be positioned using threaded M5*5 holes
Do not apply excessive torque when adjusting (max 2.2Nm)
The operating distance is measured starting from the front surface of the sensor optics
Mark detection on a reflective surface is improved by adjusting the beam direction to 5-20℃ from the surface axis
Detection
1. Position the mark in front of the sensor light spot and press 
button until the READY LED (green) turns OFF. The sensor detects the mark alternating the red, green, and blue emissions.
2. Position the background in front of the sensor light spot and press 
button; the sensor detects the mark alternating the red, green, and blue emissions. Avoid background movements during this phase.
The DARK/LIGHT operating mode is automatically selected by the sensor.
Dark mark-light background=Dark mode
Light mark-dark background=Light mode
If the READY LED (green) is permanently ON, the detection is successful.
If the LED blinks slowly, the detection has failed due to insufficient contrast.
The sensor returns to the previous setting by pressing one of the two push-buttons.
More Choices
