HB-B3HL Tongwei Wuxi Xuncheng stepper motor driver three-phase hybrid bag making machine drive paper cutter

Brief Introduction

Main Features

• The drive performance has little dependence on the motor, and the motor with different parameters can obtain excellent performance (adapted motor: BYG series stepping motor)
  

•           

• Adopt the original imported module, realize high-frequency chopper, constant current drive, with strong anti-interference

• The control signal and internal signal realize photoelectric isolation and have a series of self-protection functions such as overcurrent, overvoltage, and overheating

• The circuit similar to the servo control principle is adopted inside, which can make the motor run smoothly with almost no vibration and noise

• With a variety of subdivision modes, it can be customized according to special subdivision requirements

• 
  

• The advanced high-power module makes the output current can reach 11A (the common driver is only 8A), so that the torque and power output by the motor is higher than that of two-phase and five-phase hybrid stepping motors, which completely eliminates the uneven length of the bag and short bag phenomenon after the machine is used for a period of time.

• This product is widely used in engraving machines, medium-sized CNC machine tools, computerized embroidery machines, powdering machines, winding machines, packaging machinery, and other large and medium-sized CNC equipment with high resolution.

• 
  

Technical Specifications

Note: The internal optocoupler current-limiting resistance of the input signal is 1K. When the signal common terminal is 12V, it is directly connected. At 24V, each signal needs to be connected in series with a 1K resistor, and the pull-in current is required to be no less than 8mA. The alarm output is open collector and emitter, NPN type. VCEmax=15VIECmax=100Ma

The drive terminal

• COM: +12V
• CP: pulse signal
• UD: direction signal
• A: connect to stepper motor 1 core
• B: connect to stepper motor 3 core
• C: connect to stepper motor 5 core
• (If the motor is found to be reversed, just replace any two of the above wires.)
  
• NC: grounding
• L: 220V (live sire)
• N: 220V (neutral wire)
• Power input: AC165-235V/50HZ