>= 1 Piece(s)
US $1,200.00 ~ 1,800.00
Features of corona generator
1. Japanese Fuji IGBT module is used as the output unit to ensure stable output.
2. Digital screen displays the operating parameters and is easy to control.
3. Non-start alarm device is set to prevent misoperation.
4. High frequency with satisfying treatment effects.
5. Sensor interface can be configured to realize protections of stop and open-cover.
6. Applied to high-speed wide blown film, spray bonding, extrusion, printing, laminating, gluing, spreading, coating, box-pasting, and other special industries for the pretreatment of plastic, metal, etc.
Item | HW2003G | |
Power supply | AC2200V±10%/-15% | |
Mains frequency | 50 Hz ± 5 % | |
Line speed | 80-120m/min | |
Output frequency | 25 kHz | |
Max. output power | 3KW | |
Corona output | a. Constant at the same speed b. No influence of supply voltage | |
Dynes level | 38-44 Dynes | |
Treated side | Singel side or Double side | |
The max treated width | 1200mm | |
Treated material | Plastic film (PP, PE, PS, etc), Metal film | |
Packing size(Carton) | 61*18*41CM 22KG | |
Environment temperature | -10°C ~ +40°C | |
Environment humidity | 20%~93% no condensation | |
Application | Film blowing machine, printing machine, laminating machine, etc | |
Corona treatment station | Available to customer's requirements |
Benefits
1. Easy to install
2. Accurate output power
3. Small, compact and economical design
4. Low maintenance
5. User friendly
6. Maximum operator safety
Tips: corona treatment on printing machines
One of the converting processes is printing films or other webs of flexible material. Further corona treatment is often necessary, even though materials are used which have already been corona treated during manufacture.
However, long periods of storage mean that the surface tension is no longer enough to guarantee satisfactory adhesion of the ink.
This process requires a surface tension of at least 38-40 dyne/cm for printing inks containing solvents, and 44-46 dyne/cm for water-based printing inks which are being used more and more in the printing industry for environmental reasons. If the surface tension falls below these values it is necessary to refresh the treatment before printing to ensure good adhesion between the film and the ink.
Please get in touch with us for more machine technical details and proposals.