العربية
français, langue française
हिन्दी, हिंदी
Bahasa Indonesia
فارسی
Português
русский
Español
Afrikaans
Z3S Series 24V photoelectric sensor mark detect photoelectric switch NPN for cutting machine
>= 1 Piece(s)
US $50.00 ~ 70.00
Top Selling
- OVERVIEW
- SPECIFICATIONS
- OTHER
Brief Introduction
photoelectric sensors are controlled by converting changes in light intensity into changes in electrical signals. In general, photoelectric sensors are composed of three parts, which are divided into: transmitter, receiver and detection circuit.
The transmitter aligns the target to emit light beams, and the emitted light beams generally come from semiconductor light sources, light-emitting diodes (LEDs), laser diodes, and infrared emitting diodes. The beam is emitted continuously, or with varying pulse widths. The receiver consists of a photodiode, a phototransistor, and a photocell. In front of the receiver, optical components such as lenses and apertures are installed. Following it is the detection circuit, which filters out the valid signal and applies it.
In addition, there are emission plates and optical fibers among the structural components of the photoelectric switch.
Main Characteristics of Z3V Series
Dual light sources
High sensitivity, more accurate recognition rate and deviation correction for marking
| Model | Light source | Output wire |
|---|---|---|
| TR22 | Red | 4 core |
| TG22 | Green | 4 core |
| T22 | Red / Green | 4 core |
| TB22 | Green / Blue | 4 core |
| TW22 | Green / White | 4 core |
Key Technical Parameters of Z3V Series
| Checking mode | Co-axial |
|---|---|
| Checking distance | 10mm±2mm |
| Voltage supply | DC10~30V±10% wave<10% |
| Work currency | minus 45mA |
| Light source spectrum | Red, green, blue, white |
| Light spot | Φ0.5~Φ1.5 |
| Checking angle | Vertical with the surface, with 15°tolerance |
| Response time | 0.1~1ms |
| Output mode | Operate with light or without light |
| Output indication | Red LED |
| Output voltage | VH≤VC-1.5V VL≤1.2V |
| Currency load | 200mA(max) |
| Circuit protection device | VC polar protection short-circuit protection When the load current I>200mA, the switch automatically jumps off; and when I<200mA, the signal is automatically restored. At the same time, it has any wrong connection protection. |
| Sensitivity | Adjustable |
| Anti-background light | Sunlight<10000LX incandescent light<3000LX |
| Protection level | IP67 |
| Environmental protection temperature | Work at -15℃~65℃ storage -25℃~80℃ |
| Shell material | Industrial plastic |
| Connection wire | Φ5.4PVC 4-core cable L=2m |
| Weight | About 300g |
Wiring Method
Shell Size
Parts
More Choices
