XC2006A XC2006B XC2006S pp pe bag making machine Edge Position controller single double dual

Brief Introduction

XC series position controllers are suitable for various occasions that require positioning or fixed length. It can be statically positioned or fixed-length, and can also be dynamically positioned or fixed-length. The actuator can be a stepping motor, a servo motor, a frequency converter, or a clutch. , brakes, etc. It is also suitable for various process control by changing the software.
XC2006A/B position controller is an improved version of XC2005/XC2004, with 128×64 screen display. The product appearance, installation size and terminal block arrangement are consistent with XC2005A/B. A 12-dot matrix font display is used to observe the operating status of the machine.
The parameter set refers to XC2005, taking into account the ease of use and flexibility, and strives to cover most of the application models while making the operation as simple as possible. Some parameters are assigned by the computer, and can also be set manually if the user has other requirements.
The independent digital pulse module is used to improve the frequency accuracy, so that the operation of the feeding motor (hereinafter referred to as stepping motor) is more stable and the speed is improved. It supports double-stepping machinery (double-stepping or double-servo) and can adapt to double-color mark plus floating roller control mode.
Applicable models are rich and can be continuously expanded (rather than modified). At present, 9 basic models and 4 model options have been integrated inside the computer, which can be combined into multiple models.

Technical Data

Power supplying: 220V(AC)±10%;50Hz/60Hz; 2A

Pulse frequency: 200~9500Hz

Demonstrated: LCD 128×64

Actuation support: XC2006A double axles, XC2006B single axle

Software: RigourIII+ Ver6.20

Application: Single, double film bottom sealing, heat cut bottom sealing

                    And other equipment which needs fixed-length position control.

External dimensions: 238mm(Width)×120mm(High) ×110mm(Deep)

Opening size: 242mm(Width)×124mm(High)

Weight: 3KGS

Operation Panel

Regardless of whether the main motor functioning was called 'running', to distinguish them from 'set up state'. Running under panels shown in figure 1, lamp and window display the system status and progress of the work. The indicator window and the meaning of data as follows:

Operation: main motor running / stopped

Pulse: displacement pulse output CP1 and CP2 instructions to move or feed the ongoing

Piercing: Piercing signal synchronization, punching instructions

From material: material from signal synchronization instructions from expected

Color code: The printing - color elects, manufacture color bag. The blank - color chooses the pass, manufactures the white bag. The main electrical machinery stops when may the key revised according to [color code ]. Self-checking - the key may open or close this function according to [ self-checking ]

Polarity: Color code polarity. The black region - deep color block iseffective. The black border - tint/deep color boundary is effective.The white region - tint block is effective. The white border - deepcolor/tint boundary is effective

GK1 ：GK1 input instruction. The bright - magnet steel position (the Aposition), extinguishes - the vacancy (the B position)

GK2 ：GK2 input instruction. The bright - magnet steel position (theC/E position), extinguishes - the vacancy (the D/F position)

GK3：The first color code sensor (hereafter refers to as:GK3) inputs the instruction. The key revises the input polarityaccording to [ polarity ], the bright - color code selects,extinguishes - must selects

  GK4：The second color sensor input instructions bright - selected color, eliminate - non-selected. Floating or roller can be used as sensors, bright - floating high roller, eliminate - low

<Count>: Bag Number, Number = Bag Feeding frequency (÷ sent several times)

<Awarded several>: When the number reached Bag <whole number>, reset the count, the number approved +1

<Length>: Bag length, feeding Bag length = length (÷ sent several times)

<Speed>: Feeding times per minute, every minute movement is the number of host

<Efficiency>: A spindle location running from the location of the C axis cycle time and the ratio of

Note: 1. The trilateral closure model, the GK4 floating roll sensor, sent a few times a ~ = 4. Other models were sent several times for a constant

Keyboard

To reduce the number of keys, most of the control panel buttons are designed for dual-function keys, in different states under different definitions of the function. The key is defined as follows:

Due to the differences in models, the functions of the jog buttons are different.
Color mark search: When making a color bag, the stepper motor starts to search for the color mark after the [Click] button is released, until the color mark is selected or the key is pressed again to stop early.
Measuring length: Set the color selection to be valid and turn on the self-test function, press [Click A] (or [Click B]) to continuously search for the color code twice, and then the bag-making length can be measured.

Parameters

More parameter information click here to download instruction books or contact us.

Hall Sensor Installation

The Hall switch is an important part to coordinate the work of the main motor and the stepper motor, reflecting the cycle, phase, and other information of the working machine, and is essentially a time distributor. If there is a deviation in these information, it will affect the electromechanical coordination, resulting in poor working conditions or reduced efficiency. The following describes the installation requirements in conjunction with Figure 5.
Position A: The opening position of the cutter, the starting position of feeding, the feeding process must be completed before the position C, otherwise it will stop at overspeed.
B position: The stop position for all stop operations. Due to inertia, it will actually stop after position B, and the cutter is at the highest position at this time. (For some models) the start of the stripping signal and the end of the stripping signal are related to the number of empty cuts.
C position: the falling position of the cutter, the limit position of feeding. Move the C position back as far as possible under the condition of the machine, which can improve the efficiency, and the end position of the eager cutting machine unloading signal.
D position: (for some models) the stripping signal starts, and the stripping signal ends after a delay, and the end has nothing to do with the position.
E position: (for the return model), the starting position of the material return, the material return process must be completed before the next A position, otherwise the machine will stop at overspeed. Down blow signal starts.
F position: end of down blowing signal.

step motor Driver Wiring

1. 3-phase compounding mode

2. 3-phase reaction mode II

3. 2-phase (4-phase) compounding mode